Faraday
Новичок
- Янв
- 1
- 0
С машиной досталось два ключа, но ни на один штатная двереотпиралка не реагирует!
думал дело в батарейке - но не помогло!
подскажите как запрограммировать эти ключи?
Машина WRX 2001 европейка
Нашел решение:
1. TRANSMITTER REGISTRATION
NOTE:
A maximum of 3 transmitters can be registered for
each individual vehicle.
1) Remove the side sill cover at the driver's side,
then connect the registration connectors at the
front pillar lower section. (прозрачно белый)
2) Unlock the door lock.
3) Press the OPEN button of the transmitter to be
registered. Immediately afterwards, press the
LOCK button.
4) The door lock will automatically lock and unlock
in sequence. This indicates the completion of transmitter
registration for the first transmitter.
5) If registration of a second transmitter is now to be
carried out, press the OPEN button of that transmitter.
Immediately afterwards, press the LOCK button.
6) The door lock will automatically lock and unlock
in sequence. This indicates the completion of transmitter
registration for the second transmitter.
7) Disconnect the registration connectors after the
completion of all registration operations. After confirming
the operation of the door lock using the
newly registered transmitter(s), reinstall the side sill
cover at the driver's side.
думал дело в батарейке - но не помогло!
подскажите как запрограммировать эти ключи?
Машина WRX 2001 европейка
Нашел решение:
1. TRANSMITTER REGISTRATION
NOTE:
A maximum of 3 transmitters can be registered for
each individual vehicle.
1) Remove the side sill cover at the driver's side,
then connect the registration connectors at the
front pillar lower section. (прозрачно белый)
2) Unlock the door lock.
3) Press the OPEN button of the transmitter to be
registered. Immediately afterwards, press the
LOCK button.
4) The door lock will automatically lock and unlock
in sequence. This indicates the completion of transmitter
registration for the first transmitter.
5) If registration of a second transmitter is now to be
carried out, press the OPEN button of that transmitter.
Immediately afterwards, press the LOCK button.
6) The door lock will automatically lock and unlock
in sequence. This indicates the completion of transmitter
registration for the second transmitter.
7) Disconnect the registration connectors after the
completion of all registration operations. After confirming
the operation of the door lock using the
newly registered transmitter(s), reinstall the side sill
cover at the driver's side.
Последнее редактирование:
